Chapter 4 Maintenance Mode Functions
96
3. Complete the following fields:
– IP Address: Enter the IP address for this timeclock.
– Subnet Mask: Enter the IP address for the sub-network.
– Gateway Address: Enter the gateway IP address.
– Primary DNS: Enter the IP address for the primary DNS server.
4. Tap Save Configuration.
5. Tap Next, Connect to Dimensions.
Wi-Fi
1. Tap Wi-Fi.
2. Do one of the following:
– Select a network. Go to step 6.
–Tap Add Network. Go to the next step.
3. Enter the SSID.
4. Select the type of Security.
5. Tap Add Network.
6. EAP Method.
7. Phase 2 Authentication.
8. CA Certificate
9. Identity
10. Anonymous Identity
11. Password
12. Tap Save Configuration.
13. Tap Next, Connect to Dimensions.
To Next Page
Loading...
