KSB Delta Macro F - Inlet Conditions, Version L

92 pages

To Next Page

To Previous Page

4 Description

24 of 92

KSB Delta Macro

1983.843/04-EN

4.8.3 Inlet conditions, version L

Fig.10: L = Pressure booster system with break tank arranged at a lower level, suction

lift operation

Main Page

Table of Contents3
Glossary6
General7
Principles7
Software Changes7
Installation of Partly Completed Machinery7
Target Group7
Other Applicable Documents7
Symbols7
Key to Safety Symbols/Markings8
Safety9
General9
Intended Use9
Prevention of Foreseeable Misuse9
Personnel Qualification and Personnel Training10
Consequences and Risks Caused by Non-Compliance with this Manual10
Safety Awareness10
Safety Information for the Operator/User10
Safety Information for Maintenance, Inspection and Installation10
Unauthorised Modes of Operation11
Electromagnetic Compatibility (EMC)11
Interference Emission Requirements11
Line Harmonics Requirements12
Interference Immunity Requirements12
Transport/Storage/Disposal13
Checking the Condition Upon Delivery13
Transport13
Storage/Preservation15
Return to Supplier16
Disposal16
Description18
General Description18
Product Information as Per Regulation No. 1907/2006 (REACH)18
Designation18
Name Plate18
Design Details19
Configuration and Function20
Noise Characteristics21
Scope of Supply21
Inlet Conditions, Version M22
Inlet Conditions, Version F23
Inlet Conditions, Version L24
Dimensions and Weights25
Terminal Wiring Diagram25
Potential Equalisation25
Installation at Site27
Installation27
Installing the Pressure Booster System27
Mounting the Accumulator28
Connecting the Piping28
Fitting an Expansion Joint (Optional)29
Fitting the Pressure Reducer (Optional)29
Electrical Connection30
Sizing the Power Cable30
Connecting the Pressure Booster System31
Connecting the Remote ON/OFF Input31
Connecting the Dry Running Protection Device31
Commissioning/Start-Up/Shutdown32
Commissioning/Start-Up32
Prerequisites for Commissioning/Start-Up32
Priming and Venting the Pressure Booster System32
Dry Running Protection33
Start-Up33
Checklist for Commissioning/Start-Up34
Operating Limits35
Frequency of Starts35
Ambient Temperatures35
Maximum Operating Pressure35
Fluid Handled35
Minimum Flow Rate36
Shutdown36
Stopping36
Measures to be Taken for Shutdown37
Operation38
Control Panel38
Screen38
Turn/Push Button38
Status LED38
Symbols on the Screen39
Operating Status of the System39
Bluetooth Connection39
Locking/Unlocking the Screen39
Operating Status of the Pump39
Information on the System39
Operating the Device Via the Control Panel42
Unlocking the Screen42
Changing the Operating Mode43
Resetting Messages43
Setting the Setpoint43
Activating the Bluetooth Connection43
Displaying the Firmware Version43
Operation Via the App44
Servicing/Maintenance45
General Information/Safety Regulations45
Inspection Contract45
Servicing/Inspection46
Supervision of Operation46
Maintenance Schedule46
Setting the Pre-Charge Pressure47
Resetting Dry Running Protection48
Trouble-Shooting49
Trouble-Shooting: Pressure Booster System49
Trouble-Shooting: Frequency Inverter51
Related Documents53
General Drawings with List of Components53
KSB Delta Macro F/VC/SVP with Movitec 2B, 4B, 6B, 10B, 15C53
KSB Delta Macro F/VC/SVP with Movitec 25B, 40B, 60B, 90B, 125B54
Parameter Lists55
Configuration55
Settings68
Messages80
Messages for Specific Pumps80
Messages for Additional Devices82
Messages for Specific Functions83
EU Declaration of Conformity86
Certificate of Decontamination87
Commissioning Report88
Index89

KSB Delta Macro F - Inlet Conditions, Version L

Table of Contents

Related product manuals