KSB Delta Macro F - Page 61

10 Related Documents KSB Delta Macro
61 of 92
1983.843/04-EN
10.2.1.3 Input/ outputs
Table27: Input/output parameters
Parameter Description Value range and dependencies Factory setting Access level Read Access level Write Re-start
required
1-3 Inputs/outputs - - Everybody Nobody -
1-3-1 Analog inputs - - Everybody Nobody -
Note: To change a function, the
function first has to be removed
by changing it to 'No function'.
To set a function all pumps have
to be set to "Manual OFF" (2-2).
- - Everybody Nobody -
1-3-1-1
1-3-1-2
1-3-1-3
Input 1
Input 2
Input 3 (extension board)
No function None Everybody Service -
Pressure sensor on suction side
Pressure sensor on discharge side
Pressure sensor at tank
Setpoint
1-3-2 Analog outputs - - Everybody Nobody -
Note: To change a function, the
function first has to be removed
by changing it to 'No function'.
To set a function all pumps have
to be set to "Manual OFF" (2-2).
- - - - -
1-3-2-1
1-3-2-2
Output 1
Output 2
None None Everybody Service -
Pump speed
Suction-side pressure
Discharge-side pressure
Tank-filling proportional valve
Tank-filling additional proportional
valve
Tank level height
1-3-3 Digital inputs - - Everybody Nobody -
Note: To change a function, the
function first has to be removed
by changing it to 'No function'.
To set a function all pumps have
to be set to "Manual OFF" (2-2).
- - - - -