Need help?Do you have a question about the KSB RPH and is the answer not in the manual?
General| Application | Water supply, irrigation |
|---|---|
| Speed | 1450 to 2900 rpm |
| Material | Cast iron, stainless steel |
| Seal Type | Mechanical seal, gland packing |
| Connection Size | DN 50 to DN 400 |
Describes the manual's purpose and scope for the pump.
Identifies the intended users of the operating manual.
Explains the various symbols used within the manual.
Defines hazard warning symbols and their meanings for safe operation.
Outlines essential safety principles for operating the pump.
Specifies the proper application and usage of the pump.
Provides guidelines for safe handling and transportation of the pump.
Details procedures for storing the pump to maintain its condition.
Overview of the pump's purpose, application, and general features.
Explains the information provided on the pump's identification name plate.
Specific construction features and components of the pump.
Critical safety rules and precautions for on-site installation.
Step-by-step guide for the physical installation of the pump.
Procedures for connecting pipelines to the pump nozzles.
Specifies load limits for pump nozzles to prevent damage.
Methods for verifying the alignment of pump and motor couplings.
Steps for adjusting the pump and motor alignment.
Guidelines for safely connecting the motor electrically.
Procedure to verify the correct direction of pump rotation.
Conditions and checks required before commissioning the pump.
Procedure for filling the bearing bracket with lubricating oil.
Handling shaft seals and priming the pump with fluid.
Managing thermal conditions for pump operation.
Sequence of operations for safely starting the pump.
Steps for safely stopping the pump and securing it.
Restrictions on pressure, temperature, and speed for safe operation.
Information on fluid properties affecting pump performance.
Essential safety rules for performing maintenance work.
Routine checks and inspections to ensure proper function.
Procedures for oil changes and bearing care.
Precautions and safety measures before starting pump disassembly.
Step-by-step guide for reassembling the pump set.
Specified torque values for various screwed connections.
Recommendations for stocking essential spare parts.
Diagnosing and fixing common operational problems.
Diagram of the pump with a list of components.
Information on different design configurations of the pump.
To Next Page
