SOFTWARE SPECIFICATIONS FOR MODEL - TECHNICAL DATA
Control Panel
lares16 lares16 IP lares48 lares48 IP lares128 IP
Manageable partitions 8 12 20
Programmable switch-on modes 16 32 64
Timers 16 16 16 32 32
Daily scheduler YES
User codes 16 48 128
Transponder keys 64 64 64 128 512
Recorded events (logger) 1500
Telephone numbers 20 50 100
DEVICES FEATURES
DEVICE
auxi
expansion
module
ergo
LCD
keypad
imago
outdoor
siren on
BUS
radius
indoor siren
on BUS
volo
volo-in
proximity
readers
divide
BUS isolator/
repeater
gemino
GSM
communicator
ATS4
pontis
PSTN
communicator
ATS2
duo BUS
wireless
receiver
opis
Supervised
power supply
station
IMQ
SISTEMI DI SICUREZZA
EN50131-1 • EN50131-3
* *
CONSUMPTION
20mA
P terminal
and outputs
excluded
15mA
stand-by
400mA
max
20mA
stand-by
250mA
max
20mA
stand-by
250mA
max
40mA 20mA
80mA
stand-by
250mA
max
60mA
stand-by
90mA
max
50mA
max
50mA
*
In order to maintain the conformity with the listed norms at page 15, the GSM communicator gemino and PSTN communicator pontis have to
be installed on metal cabinet. In case of installed pontis, system will be certied grade 2. In order to guarantee a sufcient GSM signal coverage, it
is recommended to implement an external antenna.
* For lares16 and lares16 IP; to be compliant with T014 it must be installed in big cabinet (KSI743100.010) with 18 Ah battery only and 3A Power
supply (KSI7101230.000)
INTRODUCTION
lares is the new trade mark of Ksenia Security’s professional burglar alarm systems. This is a somewhat reductive
denition, in view of the enormous potential and exibility of these systems that are able to encompass the other
branches of security so as to manage the automation and the integration of buildings, TVCC, control of accesses
and other applications.
The lares systems are available in three models and ve different versions which are expandable from 16 to 128 inputs
to cover all targets of the market, from real estate to large-building department stores. The modularity and versatility
of the lares series enables the system, even by a large range of peripherals and the IP connection, to be adapted to
any current requirement as well as to later expansions.
System expandability is implemented by the auxi devices that operate on the fast 4-wire KS-BUS. The lares systems
can be programmed by a PC through IP (on the version with integrated Ethernet) and by direct uploading through
the USB port. Additionally lares has various control functions (unit switch-on and -off, call lock, alarm reset), and
several others.