WORK 3
15
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
– Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
E02231-13
Main work
–
Position negative cable
1
and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
M6x12 4.5 Nm
(3.32 lbf ft)
Finishing work
– Mount the seat. ( p. 10)
– Set time and date.
3.13 Setting the time and date
Condition
The motorcycle is stationary.
E02192-01
– Press the SET button or RIGHT button when the menu is closed.
– Press the UP button or DOWN button until Settings is marked.
– Press the RIGHT or SET button to open the menu.
– Press the UP button or DOWN button until Clock & Date is
marked.
– Press the SET button to open the menu.
To Next Page
Loading...
