3 WORK
16
E02193-01
Setting the clock
– Press the UP or DOWN button until Set Clock is marked.
– Press the SET button to open the menu.
– Press the UP or DOWN button until Hours is marked.
– Press the RIGHT or LEFT button until the current hour is set.
– Press the UP or DOWN button until Minutes is marked.
– Press the RIGHT or LEFT button until the current minute is
set.
– Press the BACK button to exit the menu.
The time is stored.
E02194-01
Setting the date
– Press the UP or DOWN button until Set Date is marked.
– Press the SET button to open the menu.
– Press the UP or DOWN button until Day is marked.
– Press the RIGHT or LEFT button until the current day is set.
– Press the UP or DOWN button until Month is marked.
– Press the RIGHT or LEFT button until the current month is
set.
– Press the UP or DOWN button until Year is marked.
– Press the RIGHT or LEFT button until the current year is set.
– Press the BACK button to exit the menu.
The date is stored.
3.14 Checking the headlight setting
400726-10
– Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and switch on the low beam.
To Next Page
Loading...
