KTM 1290 SUPER ADVENTURE R User Manual

SETUP 2
7
E02445-10
–
Position holder
9
.
–
Mount and tighten screw
bk
.
– Install the engine guard. ( p. 10)
E02447-10
–
Mount rubber grommets
bl
on the windshield.
– Install the windshield. ( p. 9)
– Install the crash bar. ( p. 8)
– Remove the RACE ON key and the RACE ON chip from the
storage compartment and keep in a safe place for the han-
dover.
E02446-10
– Remove the rear right side cover. ( p. 9)
–
Pull catch
bm
on the seat release.
The seat is unlocked.
– Install the rear right side cover. ( p. 9)
– Charge the 12-V battery. ( p. 11)
– Remove the remaining films.
– Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
– Attach the stickers included in the scope of supply (optional).
– Check the headlight setting. ( p. 16)
– Turn the knurled screws on both fuel petcocks counterclock-
wise as far as possible.
– Refuel. ( p. 20)
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.

KTM 1290 SUPER ADVENTURE R Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Seat Height	880 mm
Weight (Dry)	221 kg
Fuel System	Electronic fuel injection
Cooling	Liquid cooled
Front Tire	90/90-21
Rear Tire	150/70-18
Power	160 hp (118 kW)
Torque	138 Nm
Fuel Tank Capacity	23 liters
Suspension Front	WP XPLOR 48 mm, adjustable
Suspension Rear	WP XPLOR PDS shock absorber
Clutch	PASC slipper clutch, hydraulically actuated
Frame	Chromoly steel trellis frame, powder coated
Front Brake	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brake	267 mm disc, 2-piston caliper
Traction Control	MTC (Motorcycle Traction Control)
Wheelbase	1580 mm
ABS	Bosch 9.1 MP (Cornering-ABS and Offroad-ABS)