KTM 890 Duke R US 2020 - Page 251

COOLING SYSTEM 17
249
V01254-11
– Position the motorcycle upright.
– Position an appropriate container under the engine.
–
Remove screw
1
with the seal ring.
K01374-11
–
Remove radiator cap
2
.
– Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug,
water pump
drain hole
EJOTALtracs
®
Plus 60x14
8 Nm (5.9 lbf ft)
Loctite
®
243™