RT120Q Operator’s Manual Reel Carrier - 117
Set Up
6. After installing arbor, latch retainers
(shown).
Prepare to Plow
1. Fasten and adjust seat belt.
2. Start tractor. See page 84 for start-up procedures.
3. Drive to beginning of planned plow path. See page 85 for driving procedures.
4. Set parking brake and verify parking brake indicator is on.
5. Lower backfill blade, if equipped.
NOTICE: Large reels of conduit or cable may obstruct the forward visibility of the operator.
Machines with limited forward visibility should be driven only for short distances and with the
help of a spotter.
To Next Page
Loading...
Need help?
General
