Reel Carrier - 118 RT120Q Operator’s Manual
Operate Reel Winder
Operate Reel Winder
1. Lower plow attachment.
2. Turn ignition switch to STOP.
3. Attach service line to reel.
4. Start tractor.
5. Move reel winder selector switch to activate reel winder control functions.
6. Lower reel winder arm until track meets reel flange.
7. Wind service line.
Finish Job
1. When finished winding, raise reel winder arm.
2. Adjust throttle to low.
3. Move reel winder selector switch to activate backfill blade controls.
4. Raise backfill blade, if equipped.
5. Release parking brake.
6. Follow directions in “Plow” on page 107 to begin plowing.
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
Moving parts could cut off hand or foot. Stay
away.
To Next Page
Loading...
Need help?
General
