To Next Page

To Previous Page

Drill - 138 RT120Q Operator’s Manual

Finish Job

Disassemble Drill String

1. Shut down tractor.

2. Disconnect drill string from drilling

attachment.

3. Remove drill bit.

4. Disconnect sections:

• Press tab through hole in female side

of joint (1) using special tool

(p/n 351-272).

• Pull rod sections apart (2).

Remove Drilling Attachment

1. Disconnect hydraulic hoses if necessary.

2. If desired, remove drilling attachment from

backfill blade.

Kubota RT120Q User Manual

Questions and Answers: