RT120Q Operator’s Manual Transport - 99
Retrieve
Retrieve
Under normal conditions, tractor should not be towed. If tractor becomes disabled and retrieval is
necessary:
• tow for no more than 200 yd (180 m) at less than 1 mph (1.6 km/h),
• use towing chains appropriately rated for maximum towing force,
• steering will be difficult.
Procedure
1. Set parking brake.
2. Block front and rear tracks to prevent unit
from rolling.
3. Attach tow line to all available tie-down
points facing towing vehicle.
4. Activate the tow valve (shown).
• Remove floor plate.
• Locate two hex-shaped relief valves.
• Turn each valve (whole hex)
counterclockwise three complete
revolutions.
• Replace floor plate.
5. Remove blocks.
6. Fasten and adjust seat belt.
7. Release parking brake.
8. After towing, turn tow valve clockwise three complete revolutions.
Read operator’s manual. Follow safety rules and know
how to use all controls. Your safety is at stake.
273-475
NOTICE: Do not turn tow valve
more than three revolutions.
IMPORTANT: While towing, unit will not have brakes.
To Next Page
Loading...
Need help?
General
