Need help?Do you have a question about the Kubota RT120Q and is the answer not in the manual?
Locating and recording serial numbers for the RT120Q and engine.
Describes the RT120Q's purpose as a riding trencher for service lines.
Discusses the implications and procedures for modifying the equipment.
Identifies and labels the main components of the RT120Q tractor.
Explains how to identify the front, rear, left, and right sides of the machine.
Provides information on manual structure and how to use lists and cross-references.
General safety instructions and precautions to follow before operating.
Information on chemicals known to cause cancer or birth defects.
Actions to take in case of electric strikes, gas line damage, fire, etc.
Explanation of DANGER, WARNING, CAUTION, NOTICE, and IMPORTANT terms.
Identifies and explains safety decals and warnings on the machine.
Identifies controls and indicators on the center console.
Explains the functions and icons of the graphic display module.
Details controls for backfill blade, reel winder, and steering.
Describes the parking brake control.
Explains cruise control selector and RPM dial controls.
Details ground drive speed and attachment speed/direction controls.
Covers seat belt, armrest, slide, height, and pivot adjustments.
Explains controls for trencher slide, cleaner lift, and boom lift.
Details controls for plow swing, blade steer, lift, and stow lock.
Describes controls for plow swing, blade steer, lift, stow lock, and trench/plow switch.
Identifies controls for stabilizers, boom, bucket, and ground drive.
Explains controls for saw slide and lift.
Details controls for drilling attachment rotation.
Operation of the battery disconnect switch.
Steps for gathering jobsite information and planning operations.
Procedure for setting up and operating the trencher.
Procedure for setting up and operating the plow.
Steps for setting up and performing drilling operations.
Procedure for setting up and operating the backhoe attachment.
Steps for setting up and performing sawing operations.
Procedures for backfilling, rinsing, and storing equipment.
Reviewing job plans, notifying services, and arranging traffic control.
Identifying jobsite hazards and inspecting the area before work.
Classifying jobsites based on underground hazards and applying precautions.
Ensuring availability of fuel, keys, PPE, and checking equipment condition.
Procedures for starting the tractor engine and initial checks.
Guidelines for operating the machine under normal conditions.
Precautions and factors for safe operation on slopes.
Steps for properly shutting down the tractor and equipment.
Guidance on lifting the machine using cranes or appropriate equipment.
Procedure for securing the tractor and attachments to a trailer.
Instructions for inspecting the trailer and loading the tractor for transport.
Procedure for towing the tractor if it becomes disabled.
Preparation steps before starting trenching operations.
Guidance on performing trenching operations safely.
Steps to complete the trenching job and shut down.
Procedures for positioning the tractor and attaching the plow.
Guidance on performing plowing operations and special techniques.
Steps to complete the plowing job and secure the equipment.
Steps for setting up the reel carrier, including arbor adjustment.
Instructions for operating the reel winder function.
Steps to finish the reel carrier operation and prepare for plowing.
Procedures for positioning the tractor and preparing the backhoe.
Guidance for operating the backhoe attachment.
Steps to finish the backhoe operation and stow the attachment.
Steps for preparing the drill site, including trenches and drill string.
Procedures for drilling, adding rod, backreaming, and installing product.
Steps for disassembling the drill string and removing the attachment.
Procedures for preparing the saw attachment and tractor.
Guidance on performing sawing operations safely.
Steps to complete the sawing job and shut down.
Information and operation of the cruise control feature.
Maintenance, types, and selection of chains, teeth, and sprockets.
Overview of available optional equipment for the RT120Q tractor.
Steps for backfilling the trench to restore the jobsite.
Procedure for cleaning the equipment after use.
Ensuring tools and accessories are properly loaded and secured.
General safety guidelines for servicing equipment.
Details on lubricants, fluids, and service symbols used in the manual.
Tasks to perform every 10 operating hours.
Tasks to perform every 50 operating hours.
Tasks to perform every 100 operating hours.
Tasks to perform every 250 operating hours.
Tasks to perform every 500 operating hours.
Tasks to perform every 1000 operating hours.
Tasks to perform every 2000 operating hours.
Maintenance tasks performed based on specific conditions or needs.
Dimensions, general info, operation speeds, and weights for the tractor.
Dimensions and operation specs for the H910 Trencher attachment.
Dimensions and operation specs for the H911 Trencher attachment.
Dimensions and operational specs for the H1032 Plow attachment.
Dimensions and operation specs for the H1052 Combo attachment (Trencher).
Dimensions and operational specs for the H1052 Combo attachment (Plow).
Dimensions and operational specs for the A920 Backhoe attachment.
Dimensions and capacity specs for the RC120 Reel Carrier attachment.
Dimensions and operational specs for the H1140 Saw attachment.
Steps for reporting equipment malfunctions or failures to the dealer.
Contact dealer for publications, videos, and training information.
Details on free replacement parts and labor for defects within one year.
Lists conditions and damages not covered by the product warranty.
To Next Page
General
