RT120Q Operator’s Manual Controls - 33
Center Console
9. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn
counterclockwise.
IMPORTANT: If engine does not start
on first attempt, check that all
interlock requirements have been
met, return switch to STOP, and try
again.
10. Ground drive foot
control
To move tractor forward, push
top of pedal.
To move tractor backward,
push bottom of pedal.
To increase speed in either
direction, push pedal farther
from center.
To reduce speed in either
direction, release pedal.
Pedal should automatically return to
neutral when released.
11. Steering column tilt
control
To adjust tilt, pull.
To secure steering column in
position, release.
Item Description Notes
To Next Page
Loading...
