Kuka KR 60-2 - 4.16 Stopping distances and times; 4.16.1 General information

41 / 85Issued: 08.09.2015 Version: Spez KR 30, 60-2 JET V1
4 Technical data
4.16 Stopping distances and times
4.16.1 General information
Information concerning the data:
 The stopping distance is the angle traveled by the robot from the moment
the stop signal is triggered until the robot comes to a complete standstill.
 The stopping time is the time that elapses from the moment the stop signal
is triggered until the robot comes to a complete standstill.
Fig. 4-27: Plates and labels