KVH Industries TracVision G4 User Manual

TracVision Startup and Self-test Screens
When configured as a component of a TracVision system,
GyroTrac conducts a series of startup routines and self-tests to
verify antenna operation. The TracVision self-test status screens
are only displayed when the main data display is set to show the
antenna status information (as described in Section 3.3, “Setup
Display Mode” on page 67.
54-0147
62
TracVision G4 Technical Manual
Antenna initializing
Waiting for POS data
Init RF Controller
Waiting for POS data
Initial Ext Sensor
Waiting for POS data
Initial Antenna
###.#° ##.#° ####
** Search mode 1 **
###.#° ##.#° ####
** Search mode 2 **
###.#° ##.#° ####
** Search mode 3 **
###.#° ##.#° ####
Network ID Check
###.#° ##.#° ####
Initial Rate Bias
###.#° ##.#° ####
To Main Data Display
Tracking <SATNAME>
###.#° ##.#° ####
Antenna is Tracking
###.#° ##.#° ####
Figure 3-3
TracVision G4 Startup Screens

KVH Industries TracVision G4 Specifications

General

Brand	KVH Industries
Model	TracVision G4
Category	Satellite TV System
Language	English