How to turn on the KVH Industries TracVision M3 Satellite TV System?
Ensure that the power switch located on the front of the KVH Industries Satellite TV System's interface box is turned on and that the VOLTAGE light is illuminated green.
What to do if cables are not connected properly in KVH Industries TracVision M3?
Ensure that all cables are securely connected to the receiver, TV, interface box, and antenna of your KVH Industries Satellite TV System. Verify that none of the connections have come loose.
Why is stormy weather affecting KVH Industries Satellite TV System signal?
Heavy rain or snow can weaken the satellite TV signals for your KVH Industries Satellite TV System.
What to do if there is dirt on the KVH Industries Satellite TV System antenna dome?
Dirt buildup or moisture on the dome of your KVH Industries Satellite TV System can reduce satellite reception. Ensure that the antenna dome is clean and dry.
Why KVH Industries TracVision M3 Satellite TV System antenna cannot see the satellite?
The antenna of your KVH Industries Satellite TV System needs an unobstructed view of the sky to properly receive satellite TV signals.
General| Tracking | Automatic |
|---|---|
| Roll and Pitch Correction | Yes |
| Satellite Compatibility | Ku-band |
| Humidity | Up to 95% non-condensing |
| Operational Temperature | -25°C to +70°C |
| Compatible Services | DIRECTV, DISH Network, Bell TV |
| Operating Frequency | 10.7-12.75 GHz |
| Storage Temperature | -40°C to +70°C |
To Next Page
