Before installing the spark plug, measure the
electrode gap with a feeler gauge and adjust
to specification.
Spark plug gap:
0.6~0.7 mm (0.024~0.028 in)
Tightening torque:
12.5 Nm (1.25 m.kg, 9.1 ft.lb)
When installing the spark plug, always clean
the gasket surface and use a new gasket.
Wipe off any grime from the threads and
tighten to the specified torque.
A. Spark plug gap
92
AIR FILTER CLEANING
The air cleaner accumulates dust and must
be cleaned periodically. If the ATV is ridden in
dusty areas, the air cleaner must be cleaned
at more frequent intervals than specified in
the Maintenance Schedule. If the ATV is
submerged in water, the air cleaner should be
checked and water should be drained from
the air cleaner housing before starting the
engine.
To Next Page
Loading...
