HEADLIGHT BEAM ADJUSTMENT
It is advisable to have a KYMCO dealer
make this adjustment.
To adjust:
Turn the ignition switch at " " position and
start the engine.
Adjust the headlight beam vertically by
turning the vertical beam adjuster.
A clockwise rotation moves the beam up and
counterclockwise rotation moves the beam
down.
Adjust the headlight beam horizontally by turning
the horizontal beam adjuster.
A clockwise rotation moves the beam toward the
right side of the rider.
Adjust the headlight beam as specified by local
laws and regulations.
CAUTION:
(1) Vertically adjusting bolt
(2) Horizontally adjusting bolt
(2)
(1)
NOTE:
111
To Next Page
Loading...
