(2) Fuse box cap
To replace a fuse:
1. Make sure the ignition switch is OFF.
2. Remove the battery cover (page 108).
3. Remove the fuse box cap (2).
4. Pull the old fuse out of the fuse box.
5. Push the new fuse in to the fuse box.
6. Reinstall the fuse box cap.
(2)
Fuse box:
The fuse box is located in the storage box
under the battery cover.
The specified fuses are: 20 A
(1)
(1) Fuse holder
110
To Next Page
Loading...
