CHAIN
Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 102~104 for details.)
LIGHTS
Check the position light and taillight/stop light
to make sure they are in working condition.
Repair as necessary for proper operation.
SWITCHES
Check the operation of the
switch, engine stop switch, remote engine
stop switch and any other switches.
Repair as necessary for proper operation.
taillight/stop light
THROTTLE LEVER
Check to see that the throttle lever operates
correctly. It must open smoothly and spring
back to idle position when released. Repair
as necessary for proper operation.
FITTINGS AND FASTENERS
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a KYMCO dealer or refer to the Service
Manual for correct tightening torque.
45
To Next Page
Loading...
