94
POTENTIAL HAZARD
Using low flash point solvents or
gasoline to clean the air filter element.
WHAT CAN HAPPEN
Low flash point solvents or gasoline can
catch fire or explode.
HOW TO AVOID THE HAZARD
Use parts cleaning solvent to clean the
air filter element.
4. Squeeze the excess solvent out of the filter
and let it dry.
Do not twist the filter element when
squeezing it.
CAUTION:
WARNING
5. Inspect the element. If damaged, replace
it.
6. Apply quality foam air filter oil to the
element. If foam air filter oil is not
available, motor oil may be used.
7. Reinstall the element to the .
8. Reinstall the element assembly and parts
removed for access.
air filter case
The element should be wet but not dripping.
NOTE:
To Next Page
Loading...
