4.Completely close the throttle lever and
start the engine by pushing the start switch.
5. Be sure to keep the throttle closed and the
parking brake locked while starting and
warming up the engine.
6. Allow the engine warm up before riding.
．Do not operate the throttle (open and
close rapidly) as the ATV will move
forward suddenly, causing possible loss
of control.
．Do not leave the ATV unattended while
the engine is warming up
CAUTION:
50
If the engine fails to start, release the start
switch, then push the start switch again.
Each cranking should be as short as
possible to preserve battery energy. Do not
crank the engine more than 10 seconds on
each attempt.
NOTE:
To Next Page
Loading...
