KYMCO ZING 150 - Headlight

18. LIGHTS/INSTRUMENTS/SWITCHES/HORN
18
-
1
HEADLIGHT
REMOVAL
Remove the headlight band screw to remove
the band.
Remove the headlight unit and disconnect
the headlight wire coupler.
Remove the headlight bulb and bulb socket.
Check the bulb for damage and replace with
a new one if necessary.
INSTALLATION
Install the headlight in the reverse order of
removal.
INSTRUMENT (SPEEDOMETER)
REMOVAL
Disconnect the speedometer cable.
Disconnect the speedometer bulb wire
coupler.
Remove the two bolts attaching the
speedometer seat.
Remove the speedometer.
INSTALLATION
The installation sequence is the reverse of
removal.
Bulb Socket
Headlight Unit
Instrument
Bulb
Bolt
After installation, adjust the headlight
beam.
＊
＊＊
＊
Speedometer Cable
Bolt