Kyocera Ecosys M2235dn User Manual

5-4
Operation on the Machine > Loading Originals
2
Place the originals.
1 Put the side to be scanned face-up. Slide the leading edge into the document processor as
far as it will go.
2 Open the original stopper to fit the size of the original set (Original size: Folio/Legal).
NOTE
For details on Original Orientation, refer to the following:
Original Orientation (page 6-15)
IMPORTANT
Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.
Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam.
Originals with punched holes or perforated lines should be placed in such a way
that the holes or perforations will be scanned last (not first).

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria