Kyocera Ecosys M2235dn User Manual

5-8
Operation on the Machine > Program
Program
By registering sets of frequently used functions as a single program, you can simply select one of the [Program I] to
[Program IV] keys as needed to recall those functions.
The following functions are already registered in [Program I] key. This function allows you to copy the front and back
sides of ID card or other document that is smaller than Statement or A5/Statement size onto a single page. Although the
functions are deleted by overwriting [Program I] key, you can register the same settings using the [Function Menu] key.
• Paper Selection: Cassette 1
• Same size
• Combine: 2 in 1
• Original size: A5/Statement
• Continuous scanning: ON
Registering Programs
1
Configure the settings of the functions.
Configure the settings of the functions you want to register in a program.
For the settings of functions, refer to the following:
NOTE
• It is possible to register the copy function, sending function and fax function in a program. (The fax function can be
registered or recalled only on products with the fax function installed)
• If user login administration is enabled, you can only register functions by logging in with administrator privileges.
Using Various Functions (page 6-1)
NOTE
In the case of the sending function and fax function, a destination is also registered in the
program.

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria