Kyocera Ecosys M2235dn User Manual

9-15
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
Group Authorization
1
Display the screen.
1 [System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
2 [▲] [▼] key > [User Login Set.] > [OK] key
2
Configure the setting.
[▲] [▼] key > [Group Auth.] > [OK] key > [▲] [▼] key > [Off] or [On] > [OK] key
NOTE
• To use the group authorization settings, [Netwk Authentic.] must be selected for the authentication method in
"Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (page 9-3)
ProtocolSettings (page 8-9)
• Setting to use group authorization is performed from the operation panel. The groups should be registered with
Command Center RX.
Command Center RX User Guide
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
ECOSYS M2235dn/ECOSYS M2735dn 3500 3500

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria