Kyocera Ecosys M2235dn User Manual

6-9
Using Various Functions > Functions
Collate
Offsets the output by page or set.
(Value: [Off] / [On])
Duplex
Produces two-sided prints.
The following modes are available.
One-sided to Two-sided
NOTE
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Set. (Multipurpose Tray Settings) (page 8-19)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation screen
appears. Load the required paper in the multipurpose tray and select [
OK ] to start copying.
Produces two-sided copies from one-sided originals. In case of an odd
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Binding Left/Right: Images on the second sides are not rotated.
B Binding Top: Images on the second sides are rotated 180 degrees.
Copies can be bound on the top edge, facing the same orientation
when turning the pages.
Copy
Print from
USB
Copy
Print from
USB
Original Copy
ghi
def
abc
ghi
abc
def
ghi
abc
def
Original
Copy
AB

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria