Kyocera Ecosys M2235dn User Manual

2-9
Installing and Setting up the Machine > Connecting Cables
Connecting USB Cable
1
Connect the cable to the machine.
1 Connect the USB cable to the USB interface connector.
2 Connect the other end of the cable to the PC.
2
Power on the machine.
Connecting the Power Cable
1
Connect the cable to the machine.
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
Make sure that the power to the machine is turned off.
Power Off (page 2-10)
IMPORTANT
Only use the power cable that comes with the machine.

Kyocera Ecosys M2235dn Specifications

General

Brand	Kyocera
Model	Ecosys M2235dn
Category	All in One Printer
Language	English