Kyocera Ecosys M2235dn User Manual

2-8
Installing and Setting up the Machine > Connecting Cables
Connecting Cables
Connecting LAN Cable
1
Connect the cable to the machine.
1 Connect the LAN cable to the network interface connector.
2 Connect the other end of the cable to the hub or the PC.
2
Power on the machine and configure the network.
IMPORTANT
Make sure that the power to the machine is turned off.
Power Off (page 2-10)
Network Setup (page 2-18)

Kyocera Ecosys M2235dn Specifications

General

Brand	Kyocera
Model	Ecosys M2235dn
Category	All in One Printer
Language	English