Kyocera Ecosys M2235dn User Manual

5-6
Operation on the Machine > Loading Paper in the Multipurpose Tray
2
Adjust the multipurpose tray size.
Paper sizes are marked on the multipurpose tray.
3
Load paper.
Insert the paper along the paper width guides into the tray until it stops.
After removing new paper from its packaging, fan the paper before loading it in the
multipurpose tray.
4
Specify the type of paper loaded in the multipurpose tray using
the operation panel.
Precaution for Loading Paper (page 3-2)
IMPORTANT
• When loading the paper, keep the print side facing down.
• Curled paper must be uncurled before use.
• When loading paper into the multipurpose tray, check that there is no paper left
over in the tray from a previous job before loading the paper. If there is just a small
amount of paper left over in the multipurpose tray and you want to add more, first
remove the left-over paper from the tray and include it with the new paper before
loading the paper back into the tray.
• If there is a gap between the paper and the paper width guides, readjust the guides
to fit the paper in order to prevent skewed feeding and paper jams.
• Ensure that the loaded paper does not exceed the load limits.
MP Tray Set. (Multipurpose Tray Settings) (page 8-19)

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria