Kyocera Ecosys M2235dn User Manual

2-30
Installing and Setting up the Machine > Installing Software
5
Finish the installation.
When "Your software is ready to use" appears, you can use the software. To print a test
page, click the "Print a test page" checkbox and select the machine.
Click [Finish] to exit the wizard.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
If you are installing the TWAIN driver, continue by configuring the following:
NOTE
When you have selected [Device settings] in Windows XP, the dialog box for device setting
will appear after [Finish] is clicked. Configure the settings for options installed on the
machine. Device settings can be configured after the installation is completed.
Printer Driver User Guide
Setting TWAIN Driver (page 2-34)

Kyocera Ecosys M2235dn Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax	No
Standard Paper Capacity	250 sheets
Duplex Printing	Yes
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	256 MB
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	50, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
First Print Out Time	6.8 seconds
Copy Speed	35 cpm
Scan Speed	23 images per minute
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Mobile Printing Support	Apple AirPrint, Mopria