System Menu > Notification/Report
441
Device Status Notification
[System Menu / Counter] key > [Notification/Report] > "Device Status Notification"
[Low Toner Alert]
➡ Low Toner Alert (page 436)
[Time for Maintenance Alert]
Fax Communication Report
[System Menu / Counter] key > [Notification/Report] > "Fax Communication Report"
Configure settings for Outgoing Fax report and Incoming Fax report.
This item is displayed for fax-compatible machines.
For details, refer to the following:
➡ FAX Operation Guide
Item Description
[Notify via Operation Panel] Set whether or not to display on the operation panel when a
periodic maintenance is soon.
Value: [Off], [Display Status], [Display Status and Error]
[Notify Externally (for
administration use)]
Set the timing at which the administrator will be notified of the period
remaining before the upcoming scheduled maintenance when it is soon.
This notification is used for Event Reports, Status Monitors, and
SNMPTraps (such as Printing Equipment Management Systems).
Value: Off, On
NOTE
If On is selected, set the timing of notification. The setting range is 5 to
100% (in 1% increments).
To Next Page
Loading...
