Preparation before Use > Load Paper
141
Loading in the Cassettes
1
Pull the cassette completely out of the machine.
NOTE
When pulling the cassette out of the machine, ensure it is supported and does not fall out.
2
Adjust the cassette size.
1 Adjust the position of the paper width guides located on the left and right sides of the cassette. Press the
paper width adjusting tab and slide the guides to the paper size required.
Paper sizes are marked on the cassette.
2 Adjust the paper length guide to the paper size required. Press the paper length adjusting tab and slide
the guides to the paper size required.
To Next Page
Loading...
