Troubleshooting > Troubleshooting
615
While [Auto-IP] is already set to [On], the IP address is not
assigned automatically
Is a value other than "0.0.0.0" entered for the link local address of TCP/IP(v4)?
1
Enter "0.0.0.0" in IP Address of TCP/IP(v4).
1 [System Menu / Counter] key > [NetworkSettings] > "Network Settings" [Wired Network Settings] >
"TCP/IP Settings" [IPv4 Settings]
2 Enter "0.0.0.0" in IP Address.
➡ TCP/IP (IPv4) setting (page 74)
To Next Page
Loading...
