Troubleshooting > Troubleshooting
656
"KPDL error." is displayed
PostScript error has occurred.
The job is canceled. Select [End].
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Error Clear (page 435)
"Machine failure." is displayed
Internal error has occurred.
Make a note of the error code displayed on the screen and contact service representative.
"Maximum number of scanned pages." is displayed
Is the acceptable scanning count exceeded?
Cannot scan pages any more. Follow the instructions on the screen.
"Memory is full." is displayed
The memory is full and the job cannot be continued.
Select [Continue] to process a scanned page. The print job cannot be processed completely. Select [Cancel] to
cancel the job.
The process cannot be performed due to insufficient memory.
If only [End] is displayed, select [End]. The job is canceled.
When insufficient memory occurred frequently, contact your dealer or service representative.
To Next Page
Loading...
