Troubleshooting > Troubleshooting
660
"Skewed originals or multi originals fed at once." is displayed
See the caution attached on the document processor and check the originals. If the originals are jammed, follow
the instructions on the screen to remove the originals.
➡ Remove any jammed paper in the Document Processor (Reverse Automatic) (page 734)
"SSD error." is displayed
An error has occurred on the SSD.
The job is canceled. Select [End].
The following error code is displayed:
• 01: The amount of data that can be saved at once has been exceeded. Restart the system or turn the power
OFF/ON. If the error still occurs, divide the file into smaller files.
If the error still persists, the SSD is damaged. Execute [System Initialization].
• 04: Insufficient space remaining on SSD. Move data or delete unneeded data.
NOTE
Please note that the data stored on the SSD will be deleted when system initialization is performed.
"System error." is displayed
System error has occurred.
Follow the instruction displayed on the screen.
"The device cannot be connected because allowed connections
would be exceeded." is displayed
Are you connecting more than the maximum number of Wi-Fi Direct connections?
Disconnect the mobile devices that you are not using, or set the [automatic disconnection] of this unit to
disconnect the mobile devices.
➡ Wi-Fi Direct Settings (page 472)
To Next Page
Loading...
