Kyocera ECOSYS P4040dn

Operation Panel
4-66
8 Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Optional Network menu
appears showing a list of available options.
Wireless Network (Wireless network settings )
This selects the settings for Wireless network.
1 In the Optional Network menu, press  or  to select Wireless
Network.
2 Press [OK]. The Wireless Network menu screen appears.
The following operations are possible:
• ConnectionStatus (Wireless network connection status check)...4-
66
• Quick Setup (Quick setup for the wireless network)...4-67
• Custom Setup (Detailed settings for the wireless network)...4-68
ConnectionStatus (Wireless network connection status check)
When the optional Wireless Network Interface Kit (IB-51) is installed, you can check the status of the wireless network.
1 In the Wireless Network menu, press  or  to select
ConnectionStatus.
2 Press [OK]. The ConnectionStatus screen appears.
3 Press  or . The NetwkName(SSID) is displayed.
If the entire name shown as the NetwkName(SSID)will not fit on one
line, pressing [Detail] ([Right Select]) changes to a 3-line name
display.
Login User Name:
Login
Login Password:
4000
Note The initial setting for the administrator's Login
Password is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
Optional Network:
Communication
Exit
03
Basic
02
01
Wireless Network
Note Wireless Network is only displayed when the optional Wireless Network Interface Kit (IB-51) is installed.
Wireless Network:
Custom Setup
Exit
03
Quick Setup
02
01
ConnectionStatus
ConnectionStatus:
Status:
Connected
1/ 2
ConnectionStatus:
Detail
NetwkName(SSID): 2/ 2
ABCDEFGHIJKLMNOPQRST
Detail:
ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnop
qrstuvwxyz1234567890