Kyocera ECOSYS P6230cdn - Specify the paper size.; Specify the media type.

3-11
Preparation before Use > Loading Paper
1
Display the screen.
[Menu] key > [▲] [] key > [Paper Settings] > [►] key
2
Specify the paper size.
1 [▲] [] key > [Cassette 1 (to 4) Size] > [OK] key
2 Select the paper size, and select the [OK] key.
If you selected [Custom], use the procedure below to specify the paper length and width.
3 [►] key in "Cassette 1 (to 4) Size" > [▲] [] key > [Unit] > [OK] key
4 Select the paper size units, and select the [OK] key.
5 [▲] [] key > [X Dimension] > [OK] key
6 Enter the paper width, and select the [OK] key.
7 [▲] [] key > [Y Dimension] > [OK] key
8 Enter the paper length, and select the [OK] key.
9 If you selected [Custom] in the paper size, select [◄] key.
3
Specify the media type.
1 [▲] [] key > [Cassette 1 (to 4) Type] > [OK] key
2 Select the media type, and select the [OK] key.
NOTE
[Cassette 2] to [Cassette 4] are shown when the optional paper feeder is installed.
NOTE
Select the [▲] or [▼] key to enter a number.
NOTE
Select the [▲] or [▼] key to enter a number.
NOTE
[Cassette 2] to [Cassette 4] are shown when the optional paper feeder is installed.