Kyocera ECOSYS P6230cdn

7-16
Setup and Registration (System Menu) > System Menu
HTTP Select whether to communicate using HTTP.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTP] is set to [On].
Wi-Fi
*1
Wired Network
HTTPS Select whether to communicate using HTTPS.
*2, *3
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [HTTPS] is set to [On].
Wi-Fi
*1
Wired Network
ThinPrint Select whether to use ThinPrint.
*2, *3
Value: Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint] is set to [On].
Wi-Fi
*1
Wired Network
ThinPrint over SSL To use the Thin Print over SSL protocol, set [ThinPrint Over SSL] to [On].
*2, *3
Value: Off, On
NOTE
• This function is displayed when [ThinPrint] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [ThinPrint over SSL] is set to [On].
Wi-Fi
*1
Wired Network
WSD-PRINT Set whether to use our proprietary web services.
*2
Value: Off, On
Wi-Fi Direct
*1
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [WSD-PRINT] is set to [On].
Wi-Fi
*1
Wired Network
Item Description