ix
Guide to the Operation Guide
This Operation Guide guides you through the following topics:
Chapter 1 Basic Settings and Operations
This chapter describes the names and functions of the keys and indicators
on top of the printer. Further, it explains how to make printer settings
using the KM-NET Remote Operation Panel utility contained on the
Kyocera Mita Software Library CD-ROM supplied with the printer.
Chapter 2 Maintenance
This chapter explains how to replace the toner container and how to care
for your printer.
Chapter 3 Troubleshooting
This chapter explains how to handle printer problems that may occur, such
as paper jams.
Chapter 4 Paper Selection
This chapter explains the types of paper that can be used with the printer.
Chapter 5 Fonts
This chapter explains about and lists the printer’s internal fonts.
Appendix A Options
This appendix explains available options, how to expand the printer’s
memory, and also how to install the memory card and the network
interface card.
Appendix B Host Computer Interface
This appendix describes the pin assignment and specifications for the
printer’s parallel interface, USB interface, and optional serial interface.
Appendix C Printer Specifications
This appendix lists the printer’s specifications.
Glossary
This glossary explains the terminology used in this guide.
To Next Page
Loading...
