Printer Environment
1-44
1.5.10 RAM Disk
RAM disk enables electronic sorting, which reduces the overall amount of
time required for printing. The default setting is Off.
• Data contained on the RAM disk is lost when the printer is reset or the
power is turned off.
• The RAM disk is set from the printer’s user available memory. Print
speed may be slowed or insufficient memory warnings may occur, if
the RAM disk size is inappropriate, or if the print data is too complex.
1
Click the MENU button on the start-up screen.
2
The Menu dialog box appears. Select and double click RAM disk
mode. Using the radio buttons on the right side of the screen, you
can toggle RAM disk mode On and Off.
Note
RAM disk mode
On / Off
To Next Page
Loading...
