Printer Environment
1-45
3
Set the size of the RAM disk. Click RAM disk size. Set the size by
clicking the
S and T buttons in the combo box on the right side of
the screen, or input the value directly into the combo box.
The maximum RAM disk value should be 9 MB less than the printer’s
total memory. The default RAM disk value is 7 MB (16 MB minus 9 MB).
When the total memory size is 21 MB or more (272 MB max.), the RAM
disk size on the KM-NET Remote Operation Panel is factory-set to
display 12 MB regardless of the actual total memory, which can be set to
the desired RAM size (263 MB max) with the
S button.
4
After making settings, click the OK button to return to the start-up
screen.
5
Turn the printer’s power off and on again to make the new setting
effective.
Note
RAM disk size
Current RAM disk size (MB)
To Next Page
Loading...
