Paper
1-20
Binding Setups
The term binding refers to the manner in which printed pages of paper are
joined together (by gluing, stitching, etc.) in book form. The two possible
types of binding are long-edge binding, in which pages are joined together
along their long edge; and short-edge binding, in which they are joined
together along their short edge. In selecting a binding type, you must also
consider the orientation of the printed page. You can use long-edge or
short-edge binding with either landscape or portrait printing.
Depending on the binding type and print orientation, the duplexer provides
four types of binding setups. These are: (1) portrait, long-edge, (2) portrait,
short edge, (3) landscape, long-edge, and (4) landscape, short-edge. The
figure below shows these binding setups.
Figure 1-4
Printing in Duplex Mode
1
Click the MENU button on the start-up screen.
Portrait,
long-edge
Landscape,
long-edge
Portrait,
short-edge
Landscape,
short-edge
Binding Setups
(2)
(1)
(4)
(3)
To Next Page
Loading...
