Kyocera FS-1028MFP

Panel Setup
12 SETUP GUIDE
2
Press [OK]. The Date Setting screen appears.
3
Press U or V to select Time Zone.
4
Press [OK]. The Time Zone screen appears.
5
Press U or V to select the time zone that you are in.
6
Press [OK]. The time zone is set and the Date Setting menu reappears.
Summer Time Setting
Perform the following procedure to turn the summer (daylight saving) time setting on
and off.
NOTE: This setting is valid only in the area where summer time is observed.
1
In the Date Setting menu, press U or V to select Summer Time.
2
Press [OK]. The Summer Time screen appears.
3
Press U or V to select whether summer time is enabled.
4
Press [OK]. The summer time is set and the Date Setting menu reappears.
Setting the Current Date and Time
Perform the following procedure to set the current date and time.
NOTE: Periodically check the time that is shown in the message display and adjust
as necessary to match the current time.
1
In the Date Setting menu, press U or V to select Date/Time.
2
Press [OK]. The Date/Time screen (month:day:year) is appears.
3
To set the date, for each field press U or V as many times as necessary to display
the correct value then press Z to move to the next field.
Use Y and Z to move the cursor right and left.
4
When the date is correct, press [OK]. The time setting screen (hour:minute:second)
is appears.
5
To set the time, for each field press U or V as many times as necessary to display
the correct value then press Z to move to the next field.
6
Press [OK]. The date and time is set and the Date Setting menu reappears.