Preparations
6 SETUP GUIDE
Loading Paper
1
Carefully pull the cassette all the way out of
the machine and remove the protective
packing from inside the cassette.
2
Adjust the paper length by pressing in on
the release buttons and sliding paper
stopper to fit the size of the paper. The
paper sizes are marked on the bottom of the
cassette.
3
Adjust the paper width by pressing in on the
release buttons and sliding the guides to fit
the width of the paper.
4
Fan the paper, then tap it on a level surface
to avoid media jams or skewed printing.
5
Place the paper in the cassette, with side to
be printed downward, so that the leading
edge is aligned against the paper stopper.
To Next Page
Loading...
