Kyocera FS-1028MFP

Sharing PC Folder
SETUP GUIDE 25
8
Add the user name displayed in the Group or user names. Click Add, then click
Locations. Select the computer to which the shared folder was created (Example:
PC4050) and then click OK.
9
Enter the user name added as a local user into the text box and click OK.
10
Select the added user, click the checkbox under Allow for Modify and Read, then
click OK.
11
Click OK to close the Properties dialog box.
Specifying Destination
Check the computer information required to enter on the touch panel when sending
a file. The information you require to check using the computer is:
• Entry for Host Name
• Entry for Path
• Entry for Login User Name
Checking the Entry for Host Name
Check the name of the destination computer.
1
Right-click My Computer and select Properties. The System Properties dialog
box appears.
2
Click the Computer Name tab to view the name of computer.
If the Computer Name tab contains Full computer name and Domain
The characters to the left of the first dot (.) in the Full computer name text box
correspond to the entry for Host Name. (Example: pc4050)