Kyocera FS-9120DN User Manual

Chapter 3 Using the Operator Panel
3-25
Press the  key to select an internal font, press the
 or  key repeatedly until Internal appears.
To select an option font, press the ENTER key while
> Font Select > is displayed. Press the  or 
key repeatedly until the message display indicates
Option.This operation is possible only when option
fonts are installed in the printer.
Press the  key.
The letter before the number indicates the type of
font as follows:
Press the ENTER key. A blinking question mark (?)
appears.
Press the  or  key repeatedly until the desired
font number appears. For font numbers of the inter-
nal fonts, see
List of Fonts on page 6-1 .
When the desired font is displayed, press the ENTER
key.
Press the MENU key. The message display returns to
Ready.
Changing Type for Courier/Letter Gothic
Courier or Letter Gothic font type can be selected as Regular or
Dark. For example, to change the type of Courier, proceed as follows:
Press the MENU key.
Press the  or  key repeatedly until Font > ap-
pears.
Press the  key.
Check that Internal is displayed and press the 
key.
Press the  or  key repeatedly until >Courier ap-
pears.
Press the ENTER key. A blinking question mark (?)
appears.
Select Regular or Dark using the  or  key.
Press the ENTER key.
Press the MENU key and the message display re-
turns to Ready.
Changing the Font Size
You can change the size of the default font. If the default font
is a fixed-pitch font such as Courier or Letter Gothic, the
character pitch can be changed instead of the font size.
Press the MENU key.
Press the  or  key repeatedly until Font > ap-
pears.
>Font Select >
Internal
>> I000
Letter Description
I Internal fonts
S Soft (down load) fonts
M Fonts in an option memory card
H Fonts in a RAM disk or hard disk
O Fonts in an option ROM
Table 3-8
>>?I000
>Font Select >
Internal
3
4
5
6
7
8
Font >
>Font Select >
Internal
>>Courier
Regular
>>Courier
? Regular
Font >
1
2
3
4
5
6
7
8
9
1
2

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm