EasyManuals Logo

Kyocera FS-9120DN User Manual

Kyocera FS-9120DN
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Chapter 3 Using the Operator Panel
3-47
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key to display the desired paper
type. The display changes as shown below.
Custom (1 to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
When the paper type to be customized is displayed,
press the ENTER key.
Press the key and proceed to
Setting the Paper
Weight
on the following page.
Setting the Paper Weight
You can set the paper thickness for your custom paper type
to be customized.
Display the custom paper type (see
Customizing
Paper Type on page 3-46
) and press the key.
Press the or key repeatedly until >>Paper
Weight appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key to display the desired paper
thickness. The display changes as shown below. For
details of the default setting for each paper type, see
Paper Type on page 2-5
.
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
When the desired paper thickness displayed, press
the ENTER key.
Press the MENU Key. The message display returns
to Ready.
Setting the Duplex Path
If the paper type is set to Custom, you can set whether or not
to enable duplex printing as follows. The default setting is
Enable.
Display the custom paper type (see
Customizing
Paper Type on page 3-46
) and press the key.
Press the or key repeatedly until >>Duplex
Path appears.
Press the ENTER key. A blinking question mark (?)
appears.
Select Enable or Disable using the or key.
For details of the default setting for each paper type,
see
Paper Type on page 2-5
.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Resetting the Type Adjust
Resets the custom setting that are set in
Customizing Paper
Type on page 3-46
.
Press the MENU key.
>Type Adjust >
? Custom 1
>>Paper Weight
Normal 1
>>Paper Weight
? Normal 1
5
6
7
8
1
2
3
>>Duplex Path
Enable
>>Duplex Path
? Enable
4
5
6
1
2
3
4
5
6
1

Table of Contents

Other manuals for Kyocera FS-9120DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-9120DN and is the answer not in the manual?

Kyocera FS-9120DN Specifications

General IconGeneral
I/O ports1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes88 x 148 mm - 297 x 450 mm
Power requirementsAC 220/240 V 50/60 Hz
Standard input trays2 x 500
Recommended media weight60 - 105 g/m²
Power consumption (active)920 W
Maximum print size297 x 420 mm
Maximum ISO A-series paper sizeA3
ColorNo
Print technologyLaser
Time to first page (black, normal)7 s
Print speed (black, normal quality, A4/US Letter)36 ppm
Memory slots2
Storage mediaHDD
Processor modelPower PC 750CX
Built-in processorYes
Maximum internal memory544 MB
Internal storage capacity20 GB
Sound power level (standby)39 dB
Sound pressure level (printing)53 dB
Total input capacity1200 sheets
Maximum input capacity4200 sheets
Paper tray 2 input capacity200 sheets
Maximum duty cycle55000 pages per month
Sustainability certificatesENERGY STAR
Power consumption (standby)160 W
Power consumption (PowerSave)12 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)585 x 639 x 615 mm

Related product manuals